MPT Brushless Cordless Impact Drill MPCID2139.B2

Description

The MPT MPCID2139.B2 Brushless Cordless Impact Drill Kit gives you professional-grade, high-torque power plus two batteries for nonstop work. Use one while the other charges, so there’s no downtime on the job.

Brushless motor: gives more power, higher efficiency and longer runtime per charge, plus a longer tool life with no carbon brushes to replace. It keeps full power under heavy load.

100N.m max torque: heavy-duty power for lag bolts, long screws, large fasteners, hole saws and big drill bits, with 2.5× the torque of a standard 40N.m drill.

2-speed gearbox with powerful hammer action:

• Speed 1: 0–500RPM. Maximum torque for lag bolts, large screws, hole saws, auger and spade bits.
• Speed 2: 0–2000RPM, up to 32,000BPM. High speed for fast drilling in wood and metal and rapid hammer drilling in concrete, brick and hollow blocks.

22+3 torque settings:

• 22 clutch settings: precise screwdriving without stripping or over-driving
• +3 modes: drill, hammer drill and an additional mode

13mm chuck: takes larger-shank bits, hole saws, step bits and accessories.

2 × 2.0Ah batteries with 1-hour charging:

• Two batteries: swap and keep working with no downtime
• About 1-hour charging per battery: a fully charged spare is always ready
• Lighter 2.0Ah packs: keep the drill lighter and better balanced for overhead and all-day work
• M21S Battery Share: the batteries fit all MPT 21V M21S tools

Typical uses:

• Drilling concrete, brick and block for anchors, plugs and aircon brackets
• Drilling steel, metal frames and thick hardwood
• Driving lag bolts, long screws and large fasteners
• Hole saws for doors, conduits, plumbing and electrical
• Deck building, framing, roofing and steel works
• Heavy-duty installation, construction and maintenance

It’s a professional-grade, high-torque drill kit for contractors, steel and aircon installers, electricians, carpenters, roofers and serious DIY users.

---

Key Features

• Brushless motor: more power, longer runtime, no brushes to replace
• 100N.m max torque: heavy-duty drilling and driving
• 2-speed gearbox: 0–500 / 0–2000RPM
• Up to 32,000BPM hammer function: fast drilling in concrete and masonry
• 22+3 torque settings: precise screwdriving plus drill and hammer modes
• 13mm chuck: takes larger bits, hole saws and accessories
• 2 × 2.0Ah batteries included: nonstop work, swap and keep going
• About 1-hour charging: a spare battery is always ready
• Lighter battery packs: better balance for overhead and all-day work
• M21S Battery Share: batteries fit all MPT 21V M21S tools

---

Specifications